Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).     

New phlegmarane-type, cernuane-type, and quinolizidine alkaloids from two species of Lycopodium

Two new phlegmarane-type alkaloids, cermizines A (1) and B (2), three new quinolizidine alkaloids, cermizine C (3) and senepodines G (4) and H (5), and a new C₁₆N₂ type alkaloid consisting of a quinolizidine and a piperidine ring, cermizine D (6), as well as two new cernuane-type alkaloids, cernuine N-oxide (7) and lycocernuine N-oxide (8), have been isolated together with cernuine (9) and lycocernuine (10) from the club moss Lycopodium cernuum and L. chinense. The relative stereochemistry of 1-4 and 6, and the absolute stereochemistry of 5, 7, and 8 were elucidated by combination of NOESY correlations, modified Mosher's method, chemical transformations, and computational methods. Cermizine D (6) might be a biosynthetic intermediate of cernuane-type alkaloids such as 7-10.     

Extraction of sodium and potassium perchlorates with benzo-18-crown-6 into various organic solvents. Quantitative elucidation of anion effects on the extraction-ability and -selectivity for Na(+) and K(+)

To investigate quantitatively the anion effect on the extraction-ability and -selectivity of benzo-18-crown-6 (B18C6) for alkali metal ions, the constants for overall extraction into various diluents having low dielectric constants (K(ex)) and aqueous ion-pair formation (K(MLA)) of B18C6-sodium and potassium perchlorate 1:1:1 complexes (MLA) were determined at 25 degrees C. The K(ex) value was analyzed by the four fundamental equilibrium constants. The K(MLA) values were determined by applying our established method to this perchlorate extraction system. The K(M(B18C6)A) value of the perchlorate is much larger for K(+) than for Na(+), and is much smaller than that of the picrate. The K(M(B18C6)A) value makes a minor contribution to the magnitude of K(ex) for the perchlorate system, but a major contribution to that for the picrate one. The distribution behavior of the B18C6 1:1:1 complexes with the alkali metal perchlorates follows the regular solution theory. For the diluent with a high dipole moment, however, the 1:1:1 complexes somewhat undergo the dipole-dipole interaction. B18C6 always shows very high extraction selectivity for KClO(4) over NaClO(4), which is determined mostly by the much greater log/(log K(MLA)) value for K(+) than for Na(+). The extraction-ability and -selectivity of B18C6 for Na(+) and K(+) ions with a perchlorate ion were compared with those with a picrate ion in terms of the fundamental equilibrium constants. The K(+) extraction-selectivity of B18C6 over Na(+) for the perchlorate system is superior to that for the picrate one, which is caused largely by the greater log/(log K(K(B18C6)A))-log/(log K(Na(B18C6)A)) value for the perchlorate than for the picrate. The perchlorate system is recommended for extraction separation of K(+) from Na(+).     

Structural regulation of a peptide-conjugated graft copolymer: a simple model for amyloid formation

The self-assembly of peptides and proteins into beta-sheet-rich high-order structures has attracted much attention as a result of the characteristic nanostructure of these assemblies and because of their association with neurodegenerative diseases. Here we report the structural and conformational properties of a peptide-conjugated graft copolymer, poly(gamma-methyl-L-glutamate) grafted polyallylamine (1) in a water-2,2,2-trifluoroethanol solution as a simple model for amyloid formation. Atomic force microscopy revealed that the globular peptide 1 self-assembles into nonbranching fibrils that are about 4 nm in height under certain conditions. These fibrils are rich in beta-sheets and, similar to authentic amyloid fibrils, bind the amyloidophilic dye Congo red. The secondary and quaternary structures of the peptide 1 can be controlled by manipulating the pH, solution composition, and salt concentration; this indicates that the three-dimensional packing arrangement of peptide chains is the key factor for such fibril formation. Furthermore, the addition of carboxylic acid-terminated poly(ethylene glycol), which interacts with both of amino groups of 1 and hydrophobic PMLG chains, was found to obviously inhibit the alpha-to-beta structural transition for non-assembled peptide 1 and to partially cause a beta-to-alpha structural transition against the 1-assembly in the beta-sheet form. These findings demonstrate that the amyloid fibril formation is not restricted to specific protein sequences but rather is a generic property of peptides. The ability to control the assembled structure of the peptide should provide useful information not only for understanding the amyloid fibril formation, but also for developing novel peptide-based material with well-defined nanostructures.     

New functional microspheres with active succinimide groups

Radiation-induced polymerization of monomers, for example N-methacryl-oxysuccinimide (MASu) and diethylene glycol dimethacrylate (2G), in ethyl propionate, was performed from +25°C to –78°C. The copoly (MASu/2G) microspheres were obtained in MASu monomer compositions of 30 wt % or below. The average particle diameter of copoly(MASu/2G, 20/80 wt %) microspheres obtained at irradiation temperatures of 25°, 0°, and –43 °C were 0.81±0.29, 0.63±0.26, and 0.90±0.43 m, respectively. No microspheres were formed when irradiated at –78 °C. The reactivity of the succinimide groups on the surface of copoly(MASu/2G, 20/80 wt%) microspheres was checked by reacting with ethylene diamine. The maximal amount of reacting succinimide groups was 9.4±0.5 nol/g, which corresponds to about 1 % of the total number of succinimide groups in the microsphere.     

XPS study on valence band structures of transition-metal trisulfides,TiS3, NbS3, and TaS3

Transition-metal trisulfides, TiS₃, NbS₃, and TaS₃, with a quasi-one-dimensional structure are investigated by X-ray photoelectron spectroscopic (XPS) measurements to obtain information on the valence band structures. The band structures at the Fermi level of these compounds correspond well to their transport properties. A shoulder is observed at the top of the valence band in NbS₃ and TaS₃, suggesting that this band is made up of the metal d_z² electrons. The d_z² band is occupied in NbS₃ and TaS₂ and empty in TiS₃. The characteristic features at the top of the valence band in NbS₃ imply the occurrence of d_z² band separation, which leads to a semiconducting nature.     

Reactivities of Stable Rotamers: XLIV. Ring-Opening Reactions of 1-(9-Fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene Rotamers With Acids and the Structure of Oxiranes

X-ray crystallography of the ap-form of the 1-(9-fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene has revealed that the carbon atom of the oxirane which is connected to the naphthyl group in this compound is almost planar. The specific structural features of the epoxy ring in this compound are caused by sterical effects and by the presence of a -system in the immediate vicinity of the oxirane ring. Certain differences have been found also in reactivity of rotational isomers of 2-X-substituted 1-[1-(9-fluorenyl)-2-naphthyl]ethyl cations (X = O, S, Se). At X = O arose more deprotonation product from the -position of the oxygen than in reactions of sulfur and selenium-containing analogs. Reactions of epoxides with zinc chloride almost exclusively gave the corresponding aldehydes.     

Surfactants having polyfluoroalkyl chains. II. Syntheses of anionic surfactants having two polyfluoroalkyl chains including a trifluoromethyl group at each tail and their flocculation-redispersion ability for dispersed magnetite particles in water

Anionic surfactants having two polyfluoroalkyl chains per molecule, i.e. the sodium salt of bis(1H, 1H, 2H,2H-heptadeca-fluorodecyl)-2-sulfosuccinate, CF₃(CF₂)₇(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₇CF₃, the sodium salt of bis(1H, 1H, 2H, 2H-tridecafluoro-octyl)-2-sulfosuccinate, CF₃(CF₂)₅(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₅CF₃, and the sodium salt of bis(1H, 1H, 2H, 2H-nonafluorohexyl)-2-sulfosuccinate, CF₃(CF₂)₃(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₃CF₃, have been prepared from maleic anhydride, the corresponding alcohols possessing a polyfluoroalkyl chain and sodium hydrogen sulfite. The flocculation and redispersion abilities of these surfactants for dispersed magnetic particles in water have been examined to investigate the effect of the chain length. It was found that this ability was enhanced by an increase in the chain length. The contact angles for water for pelleted surface-modified magnetite have been measured. In order to compare this ability and the contact angles, data for other fluorinated surfactant have been obtained. The Kraff point, the surface tension and the pNa of the aqueous surfactant solutions have also been measured.     

Gas permeability and permselectivity of fluorinated polybenzoxazoles

Gas permeability and permselectivity are investigated for polybenzoxazoles from bis(3-amino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (BAHHP) and aromatic diacid chlorides. Effects of thermal cyclization on the permeation properties are also investigated. The polybenzoxazole from BAHHP and 4,4′-(1,1,1,3,3,3-hexafluoroisopropylidene)dibenzoyl chloride (HFDB) displays high performance for CO₂/CH₄ separation ( $ {\rm P}_{{\rm CO}_2 } $ = 6.1 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, and $ {{{\rm P}_{{\rm CO}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm CO}_2 } } {{\rm P}_{{\rm CH}_4 } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_4 } }} $ = 38 at 35°C). The polybenzoxazole from BAHHP and 2,6-naphthalene dicarbonyl chloride displays high performance for H₂/CO or H₂/CH₄ separation ( $ {\rm P}_{{\rm H}_2 } $ = 2.4 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CO}} }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CO}} }} $ = 71, and $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CH}_{\rm 4} } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_{\rm 4} } }} $ = 250). Permeation properties for the polybenzoxazole from BAHHP and HFDB are close to those for a polyimide of similar chemical structure. The permeation properties are discussed in connection with packing density and local segmental mobility. © 1992 John Wiley & Sons, Inc.